Points forts
| "One Radio" with Multi-protocol Support: designed to operate under an NXDN or DMR digital CAI, and FM analog protocols | 
| Upgradable Digital/Analog mode by software option (no firmware upgrade required) | 
| Easy visible, white backlit LCD display: Alphanumeric, 10-digit, 13-character frame (aliases and icons) | 
| 7-color LED indicator used to display various radio status | 
| Renowned KENWOOD Audio Quality: 6 W (max. ) loud audio and optimizable TX/RX audio profile: Audio Equalizer, Auto Gain Control (TX/RX) and Microphone type settings | 
| Max. 260 channels per radio, 128 zones per radio, and 250 channels per zone | 
| Various scan functions: Dual/Single Priority scan, Multi/Single Zone scan and more | 
| Orange-colored Emergency button & Customizable Emergency functions | 
| D-sub, 15-pin connector on the rear panel | 
| IP54 and MIL-STD 810C/D/E/F/G/H | 
Accessoires fournis
| Câble d' alimentation CC | Oui | 
| Fusible | Oui, 10 A | 
| Mode d'emploi | Oui, - anglais, espagnol, allemand, français, néerlandais, italien, turc et grec | 
| Support de montage | Oui | 
| Ensemble de vis | Oui | 
Caractéristiques générales PMR
Caractéristiques "FleetSync Signalling"
| External-device Switching | Oui, External devices can be switched (via the AUX output) on receipt of a status ID code | 
| Paging Call Function | Oui | 
| PTT ID Digital ANI | Oui | 
| Selective Calling | Oui | 
| Send GPS Data | Oui, - from an optional NMEA-0183 GPS | 
| Short/Long Text Messages | Oui | 
| Status Messaging | Oui, Status messages are pre-programmed 2-digit codes from 10 - 99 (numbers 80 - 99 are reserved for special messages). Up to 15 messages can be stored in stack memory. | 
Caractéristiques "MDC1200 Signalling"
| Emergency Encode/Decode | Oui | 
| PTT ID Encode/Decode | Oui | 
| Radio check Decode | Oui | 
| Stun/Revive Decode | Oui | 
Options
| Internal GPS Board | Yes - NMEA 0183 V2 compatible | 
| "Molex" interface | Via KCT-60M Cable | 
Normes applicables
| RE Directive | EN300 086, 300 113, 300 219, 301 489 | 
| EU Safety | EN60215, EN62368 | 
| Factory Quality Certification and Location | ISO 9001. Manufactured in Singapore | 
| For use in the EU | Oui | 
| IP54 | Oui | 
| MIL-STD 810 C/D/E/F/G/H | Oui | 
Spécifications techniques
| Frequency Range - E Type | 400-470 MHz | 
| Number of Channels | 260 | 
| Number of Zones | 128 | 
| Channel Spacing - Analogue - Wide/Mid/Narrow | 25 kHz/20 kHz/12,5 kHz | 
| Antenna Impedance - 50 Ohm | Oui | 
| Current drain | Standby: 0.45 A max. RX: 2.4 A max. TX: 10.0 A max. | 
| Frequency Stability | ± 0,5 ppm (-30 °C to + 60 °C) | 
| Operating Temperature Range | -30 °C to + 60 °C | 
| Operating Voltage | 13.2 V DC ± 15% | 
| Dimensions (WxHxD) | 160 x 43 x 137.7 mm (Projections not included) | 
| Weight (net) | 1.21 kg | 
Caractéristiques du récepteur
| Adjacent Channel Selectivity | Wide/Mid/Narrow - 75/73/65 dB | 
| Audio Output | 6 W (max.) / 4 W (rated) at 4 Ohm | 
| Intermodulation | 65 dB | 
| Sensitivity - EIA 12 dB SINAD | 0.26 µV at 25 kHz 0.27 µV at 20 kHz 0.22 µV at 12.5 kHz | 
| Sensitivity - EN 20 dB SINAD | 0.32 µV at 25 kHz 0.33 µV at 20 kHz 0.33 µV at 12.5 kHz | 
| Spurious & Image Rejection | 75 dB | 
Caractéristiques d'émetteur
| RF Power Output (High/Low) | 25 W / 5 W | 
| FM Noise (EIA) | Wide/Mid/Narrow: 45/43/40 dB | 
| Distorsion de modulation de l'émetteur - Large/moyen/étroit | 3% | 
| Modulation Limiting | ± 5.0 kHz at 25 kHz ± 4.0 kHz at 20 kHz ± 2.5 kHz at 12.5 kHz | 
| Spurious Emission (EN) | < 1 GHz ≤ -36 dBm 1 GHz - 4 GHz ≤ -30 dBm | 








 
							
